 |
The big Lathe
machines, the biggest in Syria, which occupy a large space of
the main hall, are considered to be the backbone of the production
lines, as they manufacture the metallic molds by means of which
pipes are produced. The relatively small lathe machine produces
the molds of diameters from 200 up to 800 mm, and the length
of 12 m. It also laths the spigot, at the place of locating
the gaskets, after being manufactured, as well as cutting the
pipes at the areas of the bell and spigot.
|
 |
As to the
big lathe machine, which is one of the biggest in Syria and may
be the biggest, by means of which the metallic molds for big diameters
of 900 up to 3000 mm, at a length of 12 m are manufactured,
as well as lathing the spigot of the pipe after being manufactured
at the place of locating the gaskets, and also cutting the pipes
at the areas of the bell and spigot.
|
 |
All these lathes
machines work according to completely computerized program of high technology.
The hall also includes an auxiliary workshop for manufacturing of spare
parts necessary and auxiliary for production. This auxiliary workshop
is composed of a group of small laths machines, milling machines, perforators,
blacksmithing and welding workshops, and a big milling machine that
is computerized. Raw materials used in production of GRP pipes are mostly
imported: Resins, different kinds of fiberglass, polyester net…liquid
materials added to accelerate resin hardening. As to pure silica sand,
it is transported from the area of Al Quariatine after being stored,
cleaned and dried to eliminate dampness.
Back
|
